Repairing mortars concrete and mineral consolidants - Covercem

At Covercem® we find different types of coatings for the renovation, protection, consolidation and restoration of mineral and cementitious supports. High-performance products aimed at restoration, heritage and theming. Some of them provide anti-slip finishes to the materials on which they are applied, such as the case of imprinted concrete.

Repairing mortars for concrete and consolidating mineral coatings designed to renew the most worn supports over time, as well as constant exposure to different weather conditions. A line of products that allows the professional to restore and decorate at the same time concrete walls and pavements. And also other supports such as natural stone, brick, limestone, imprinted concrete and other mortars.

Repair mortars for concrete that stand out for their excellent mechanical properties and resistance to abrasion. An aesthetic renovation to which must be added, in some cases, a water-repellent effect that helps protect the treated support from water.

Products with excellent adhesion on cementitious and mineral supports and suitable for outdoor application because they enjoy great resistance to weather and UV radiation. Likewise, their hardness and easy application are other elements that best define them. Concrete repair mortars and mineral consolidants that do not crack.

Four products make up the Covercem® line from Topciment: Covercem® Stone, Covercem® Texture, Covercem® Restaura, Covercem® Monocrom y Covercem® Xtrem.

Covercem® Stone concrete repair mortar

Covercem® Stone is a thin-layer concrete repair mortar. Despite being applied in layers of only 1 to 2 mm thick, it has magnificent mechanical properties and resistance to abrasion. It is also very hard, it does not crack.

This aesthetic renovation mortar can be applied on a multitude of mineral and porous supports, as it presents unbeatable adhesion. It also provides a great consolidating effect on supports that are deteriorated while at the same time transferring a waterproof protection to them.

Offers finishes with different textures, among them non-slip. A concrete repair mortar that given its mineral character is highly breathable and fireproof. With Covercem® Stone, it can renovate and transform vertical surfaces and concrete floors, imprinted concrete, brick, natural stone, etc.

An ideal coating for the repair and surface renewal of pedestrian lanes, terraces, pool decks or stairs, among others. Easy to apply and perfect for outdoor use, thanks to its resistance to UV radiation.

Based on selected aggregates, portland cement and high-performance additives, this concrete repair mortar can be pigmented with our Arcocem® pastes. Available in matte finish.

Download the technical sheet of Covercem® Stone aquí

Technical features of the concrete repair mortar Covercem® Stone

Layers between 1 and 2 mm

Resistant to weather and UV rays

Water-repellent protection and anti-slip finish

Sealing (23ºC)

24h

Performance

The performance of the Covercem® Stone concrete repair mortar is subject to the roughness and porosity of the support and the application method. Approximately, between 1.5 - 1.8 kg/m²/mm

Presentation

The Covercem® Stone concrete repair mortar is available in 20 Kg packages.

Where to use the Covercem® Stone concrete repair mortar

As an aesthetic renovation mortar for restoration, heritage and theming.

For the renovation and repair of imprinted concrete, natural stone, brick and other mineral and cement supports.

Superficial and aesthetic repair of corners, damaged edges, chipping and small breaks.

Concrete repair mortar suitable for walls, floors and facades. Both indoors and outdoors.

It can be used on walks, pedestrian lanes, pavements, patios, terraces, pool covers, stairs, walls and floors.

How to apply the Covercem® Stone concrete repair mortar

1. Protect the perimeter and areas where the Covercem® Stone concrete repair mortar will not be used. Especially if the supports are metallic, lacquered, glass or wood.

2. Clean the support from dust, grease or dirt. Use Ecoclean Construction diluted 1:4 in water to remove hygroscopic salts, efflorescence, mould, etc. For more general dirt, greases or pollution marks, do it with Ecoclean Pro diluted 1:4 in water.

3. If the support is varnished or painted, remove the coating with sanding or stripping. If a repair or joint sealing is necessary, carry out before the application of Covercem® Stone.

4. Mix the mortar with water in the following proportions: 20 kg of COVERCEM® STONE per 6 L of water. Previously incorporate the water into a container and, with mechanical agitation at low revolution, gradually add the mortar until achieving a homogeneous and lump-free mixture.

5. Allow the mixture to rest between 3 and 5 minutes. Then, stir again. In the case of porous surfaces, dampen the support without leaving puddles.

6. Covercem® Stone is a colourless concrete repair mortar. Pre-pigment the water with Arcocem® Basic or Arcocem® Plus pigments, depending on the desired colour.

7. Apply two coats of Covercem® Stone at an ambient and support temperature that must be between 5ºC and 30ºC. Without excessive wind. Allow to dry between 4 and 6 hours between coats.

8. Once the support has dried after the application of the concrete repair mortar, it is necessary to proceed with the sealing. Protect the pavement or wall with two coats of our Sealcem® WT or Sealcem® DSV varnishes.

9. The total curing of Covercem® Stone is between 7 and 14 days.

If you want to achieve a contrast effect that is more similar to imprinted mortar, you can use the dispenser with Desmocem® Liquid with colour. However, once the support is dry and clean after having applied the second coat of Covercem® Stone.

If areas saturated with coloured release agent are observed, either at the time of application or once the support has dried, apply colourless Desmocem® Liquid to reduce the inequality.

Precautions for the concrete repair mortar Covercem® Stone

It is a concrete repair mortar that we do not recommend placing on those surfaces previously painted with other systems. We refer to plastic paints, epoxies, polyurethanes, varnishes, etc. For these cases, it is necessary to remove the previous coating before applying Covercem® Stone.

Powder product whose packaging must be disposed of in accordance with legal regulations.

Close immediately after each use to prevent drying or thickening.

It is recommended to comply with the following measures to apply this concrete repair mortar:

Ensure good ventilation at the time of application

Have a dust mask, FFPP2 or FFP3.

To avoid unwanted splashes, use protective glasses.

Protect hands with rubber gloves.

Mineral consolidant for polishing Covercem® Xtrem

Covercem® Xtrem is a mineral consolidating coating with nano lithium silicate and special polysiloxanes. Designed for the consolidation and waterproofing of mineral supports, mortars, imprinted concrete, polished concrete, brick, natural stone, microcement, etc.

The main particularity of this mineral consolidant for polishing is that it provides waterproof character to the supports. In this way, it considerably increases its protection against water as well as different atmospheric agents such as humidity, water or wind. A product that due to this uniqueness is suitable for exteriors, especially for polished concrete due to its finish.

A high-penetrability fireproof mineral consolidant on mineral supports and a great power of consolidation through crystallisation and solidification. Protects and consolidates mineral supports in restoration, heritage and theming.

It does not affect the colour of the support at all, thus respecting the original texture of the support. It also does not allow substances or liquids to penetrate the supports, preventing the possible appearance of permanent stains. Completely ecological, free of biocides and dangerous substances. Quick drying to the touch, between 1 and 2 hours at 23ºC.

Download the technical sheet of Covercem® Xtrem here

Technical features of the mineral consolidant Covercem® Xtrem

10-11

Density

1,04 ±0,02 g/cm3

Dynamic viscosity (L3 at 250 rpm)

5 ± 2 mPa•s

Lithium content

≥ 5%

Performance

The performance of the mineral consolidant for polishing Covercem® Xtrem depends on the application, roughness and porosity of the substrate. As a consolidant: 6-8m2/L (two coats).

Presentation

The mineral consolidating coating Covercem® Xtrem is available in 5 and 25 litre containers.

Where to use the mineral consolidant Covercem® Xtrem

Mineral consolidant protector of polished concretes.

To consolidate and waterproof also imprinted concrete coatings, mortars, microcement, brick, natural stone...

Perfect for decorative applications and restoration of worn mineral supports.

Thematization, restoration and heritage. Walls, floors and facades.

In the case of concrete, this mineral coating fixes the dyes on the support and enhances the shine with polishing.

How to apply the mineral consolidant Covercem® Xtrem

1. Clean the support with our Ecoclean range to ensure a good application and absorption on the support. Use Ecoclean Construction diluted 1:4 in water to ensure the removal of hygroscopic salts and the opening of the pore. Use Ecoclean Pro diluted 1:4 in water for the remains of pollution, fats and dirt in general.

2. On varnished and painted surfaces, sand or strip. Carry out a repair or joint sealing if necessary before applying the mineral consolidant Covercem® Xtrem.

3. Define the areas where the product is not going to be applied. Especially if these are metallic, lacquered, glass or wood.

4. Apply two coats of the mineral consolidating coating Covercem® Xtrem. It can be done with a brush, roller or by spraying. It can be done from pure to diluted 1:1 in water. Allow a drying period of between 4 and 8 hours between coats.

5. For polished concrete floors, distribute Covercem® Xtrem well using a mop. This ensures proper distribution and absorption in the support. Polish the surface until the desired shine and finish is achieved.

Do not leave excess or leftover product of Covercem® Xtrem. The application of this mineral consolidant with waterproofing properties must be done at an ambient and support temperature between 5ºC and 30ºC. As for curing, it is approximately one week.

Precautions for the mineral consolidant Covercem® Xtrem

Non-flammable mineral consolidating coating. At the slightest contact with the eyes, rinse with plenty of water for 15 minutes. Also seek medical assistance. Wash with soap and water if there is skin contact. Do not use solvents or thinners.

Factors to consider when applying Covercem® Xtrem:

Good ventilation.

Protect the face with a mask with chemical absorbent and protective glasses to avoid splashes.

For hands, use rubber gloves.

Repairing and consolidating mortars colours Covercem®

The concrete repair mortars and mineral consolidating coatings belonging to the Covercem® family share the same colour range. With the exception of Covercem® Xtrem. A total of 24 shades that, depending on the varnish applied over the coating, offer one finish or another.