Why bet on imprinted concrete for the pool? Advantages

The imprinted concreteit is the favorite material of many users and construction companies to coat the area around the pool. A decorative pavement that is also functional, as it provides excellent resistance to UV rays and abrasion, among many others.

A highly recommended option due to the low cost it represents in comparison with the benefits it offers. Its ability to mimic all types of finishes and textures of much more expensive materials, such as marble, stone or wood, is one of the main reasons for its overwhelming success.

Why use imprinted concrete to decorate the pool

Choosing imprinted concrete as a decorative coating for the area around the pool is more than correct. Starting because it is a non-slip pavement, which provides safety against unwanted falls and slips. Not all materials can guarantee this finish.

Stamped concrete has the quality in addition to being adaptable to the terrain and having an extraordinary hardness. It is a pavement that fits perfectly to all types of surfaces regardless of whether they have irregularities. The final finish will be completely homogeneous and resistant to erosion, temperature changes, wear, high traffic, etc.

In the same way, the low maintenance and investment required by this coating promotes its use to decorate the space around the pool to the detriment of other materials such as wood, for example. An option that is very much worth it for a myriad of advantages it provides.

Advantages of imprinted concrete for the pool

There are many advantages to using imprinted concrete around the pool. Below we develop the most important ones.

Provides protection against slips and falls

The molds used as well as the resins that are applied to seal the support, give an anti-slip character to this type of concrete. The result is a very safe surface with much better grip where slips and falls have no place.

Prevent puddles of water from forming and weeds from growing

In relation to the previous advantage, imprinted concrete for swimming pools is very resistant to water erosion and excess humidity. Thanks to its porosity, it prevents the formation of water puddles and therefore, the pavement does not remain wet for a prolonged period. Hence, it is an ideal material for the area around the pool.

Resistant to cold-heat cycles

Stamped concrete tolerates the incidence of sunlight as well as rain and wind. Therefore, it is perfect for coating outdoor spaces. Likewise, it is a very resistant material to wear by abrasion.

Provides a significant economic savings

The price is one of the most determining factors in the choice of one outdoor flooring or another. In the case of imprinted concrete even more so, since it is very affordable compared to other materials. You save on installation, maintenance and assembly while obtaining the same finish as brick, wood, ceramic or any other noble material.

Available in a wide range of finishes

Not everything is going to be functionality. Aesthetics are also important when we talk about the decoration of a pool. This coating meets both requirements without exception. Thanks to the wide variety of molds and colors available, the finishes are endless. Finishes that fit perfectly with any design and style that you want to give to the garden in which the imprinted concrete pool is framed.

High durability and low maintenance pavement

Compared to other pavements, it is a material very easy to clean and keep in optimal condition. By preventing the accumulation of dirt and the growth of weeds, it is only necessary to wash occasionally with a little water and soap.

Most common problems of applying imprinted concrete around the pool

The imprinted concrete around the pool has more than enough benefits that justify its popularity. But that does not take away, that there are also a series of related drawbacks. We develop the most common ones.

Saline water accumulation

One of the drawbacks is the formation of scales. The accumulation of saline water causes surface erosion, also affecting sealers or resins and causing scales to form. A type of water that in the event of a crack or small fissure in the pavement due to improper use or application of imprinted concrete, upon contact would cause defects in the resin layer.

An effect that can also be caused by wet-dry cycles and vice versa. When water evaporates, the crystals that form can break the pavement bonds and lift the concrete. It is very important to control at all times the salt levels, so that the pH is not too acidic.

Poor choice of imprinted mold for the pool

The relief and texture matter. And in the case of the pool even more so. Not all imprinted molds offer the same degree of slip resistance, some can even be very slippery and generate unpleasant falls on the crown and edges of the pool. Therefore, care must be taken with the stamping to be carried out and not focus solely on aesthetics.

Create imprinted concrete pools in extreme climates

Extreme temperatures, high and low, can damage the imprinted concrete around the pool. Excessive heat or cold that can negatively affect the coating for various reasons:

- Premature dehydration that causes cracks.

- Too rapid hydration that causes less dense structures and, therefore, a decrease in pavement strength.

- Loss of consistency.

For all these reasons, it is essential to cure the concrete properly and increase the dose of polyfunctional additive.

Phases of the application of imprinted concrete for swimming pools

The application is quite simple and easy to execute. It is no more complicated than doing it on another type of pavement. Next, we explain the different steps and phases to implement the imprinted concrete around the pool.

1. Condition and treat the area around the pool

Before pouring the concrete, it is important to prepare the ground. The surface has to be homogeneous so that no unevenness or cracks are generated in the pavement. In the case of the area around the pool, the perimeter must be leveled in such a way that it is slightly higher than the pool itself.

2. Place the mesh and perform expansion joints

The mesh is very important to give breadth and consistency to the imprinted concrete pool. Ideally, try to make it about 2 cm from the pavement. Once the imprinted concrete system is finished, the expansion joints would be executed to obtain a higher quality decorative finish. Since what the joints do is prevent the pavement from cracking.

3. Apply, spread and level the imprinted concrete for pool

When the surface is perfectly conditioned, it is time to pour and spread the concrete around the pool. If the height of the pour exceeds 1.20 meters, we recommend using gutters. Once distributed, level and smooth the concrete to flatten the surface.

4. Pigment the imprinted concrete for pool

One of the most important phases of applying imprinted concrete for a pool: giving it personality with the use of a color hardener. Check that the concrete has set a bit before sprinkling the hardener to get a better finish. In this regard, we have developed Stonecem Floor®, a pigmented imprinted mortar.

Another option, equally valid although a little less traditional and known, is to pigment the imprinted concrete for the pool by mass coloring. A method for which we have developed Arcocem Fast®.

5. Use release agent

After coloring the concrete, a release agent must be added, which can be in powder or liquid form. The purpose of this product is to prevent the concrete from entering the molds that give the pavement its final texture and design.

6. Stamp the imprinted molds around the pool

Subsequently, the imprinted molds are stamped in the area around the pool. Molds that can have the most varied shapes: tiles, stone, wood, etc. Let the imprinted concrete for the pool finish setting and hardening. When it is completely dry, remove the molds.

7. Wash and protect the imprinted concrete of the pool

When the pavement is completely dry, the surface will need to be cleaned to remove any excess aggregates that may have been impregnated. A cleaning that is usually done with pressurized water. Then, apply the resin to protect the area around the pool.

Finished imprinted concrete pool: molds and colors

Theprinted moldsthey are responsible for giving texture and shape to this pavement. In the market there is a wide variety to satisfy the tastes and needs of each client. Among the most demanded molds for imprinted concrete for swimming pools are those of wood (for their relief and aesthetics), those of stone (especially those of English stone for their enormous resemblance to ceramics) and blanket type molds (although their relief is less, it is more comfortable to step on).

Combined with the vast range of colors available, the finishes are endless. As a general rule, light colors such as white, gray, ochre or earth tones are most commonly used for the area surrounding the imprinted concrete pool.

Price of imprinted concrete pool per square meter

The price of this pavement is subject to various factors that can generate fluctuations in the cost per square meter. The type of mold or design chosen, the particular rates of each applicator, the quality of the supplied materials, the dimensions of the pool, the complexity of the work and the geographical area are just some of them.

On this last point, it should be noted that there are some countries that legally require the use of a special varnish that provides a slipperiness level 3 to the pavement of the area around the pool. This is the case in our country. A requirement that, obviously, increases the cost. In general terms, the price of imprinted concrete pool per m2 is between 40 and 100 euros approximately in Spain.

Application and maintenance tips for imprinted concrete in the pool

Although imprinted concrete is a coating of excellent durability and resistance, there are a series of elements that should be taken into account to get the most out of this type of paving around the pool. Below, we detail the main application and maintenance tips that experts advise to keep in mind.

Use imprinted molds with greater slip resistance

Unlike other materials, stamped concrete itself provides a non-slip character. Mainly thanks to the texture and relief of the imprinted molds themselves. A benefit that validates, of course, its widespread use in the pool area. However, there are some imprinted molds that enjoy a higher degree of non-slip and these are the ones that experts recommend using if possible. It all depends on the design you want to make and each person's budget.

Opt for light colors for the imprinted concrete in the pool

It is proven that light colors better disguise the stains caused by the deposits of the pool water. So, it is necessary to avoid using dark shades as much as possible.

Avoid leaving a thick layer of resin

As far as possible, it is necessary to avoid applying a thick layer of resin. Excess is one of the most recurring problems in the application of imprinted concrete in the pool. Abundance can trigger notable color differences in the pavement, a loss of shine from the resin, the generation of white spots or the appearance of bubbles during the curing time, among others.

Clean the surface from time to time

By creating a continuous coating, the imprinted concrete for swimming pools prevents the growth of weeds as well as the accumulation of dirt in the joints. Even so, professionals recommend cleaning the pavement occasionally in a superficial way with water and mild detergent.

Renew the resin of the imprinted concrete around the pool every 2-3 years

Similarly, it is advisable to restore the resin in a period of approximately 2-3 years. Why? Because over time the stamped concrete loses shine and color due to the wear of the resin. Since we must not forget that it is a pavement constantly exposed to weather conditions.

Wash the imprinted concrete pool after each use

One of the most important tips. After each swim in the pool, it is advisable to wash the surface with a hose. In this way, possible accumulations of saline water on the concrete lining are prevented.