Pigments for concrete resistant to UV light and alkalis

The best decorative coatings require the best pigments. Color is a transcendental factor in decorative pavements as it beautifies the final result of them. And more in the floors of imprinted concrete, a continuous pavement that imitates the texture and color of other materials such as brick, stone and even wood.

A need to which Arcocem® responds, our complete range of pigments for concrete to give a personal touch to any creation. Pigments of high coloring strength with which a wide variety of colors can be acquired. Of high covering power, they provide an extraordinary and durable finish.

Pigments that stand out for their high color stability, being suitable for both indoor and outdoor use. With magnificent resistance to UV light, weather and alkalis.

Our pigments undergo complex and strict quality controls.

Thanks to their excellent chemical stability, our pigments are capable of remaining unaltered in the most extreme environments. The color is maintained without losing an iota of intensity thanks to its good thermal resistance.

Designed to professionally color mortars, terrazzo, plasters, microcement, prefabricated and plastering mortars. In addition to concrete and imprinted concrete. The intensity of the shade will depend on the amount of pigment used.

Other factors such as the granularity of the aggregates, the ratio between water and cement, the trowelling or the porosity can also affect the coloration of the concrete or mortar.

Within Arcocem®, we have pigments for concrete in powder format, water-based and solvent-based. Each subfamily contemplates its own color chart, in which there are colors from more intense and vivid to more neutral and pastel tones.

Arcocem® WT Basic water-based pigments for concrete

Arcocem® Basic names the water-based pigments thanks to which all the colors of imprinted concrete from the Topciment chart can be achieved. A ready-to-use product that does not require dilution and offers extraordinary resistances to alkalis and sunlight.

A total of 13 aqueous dispersion pigmented pastes that can be applied in countless systems: concrete, imprinted concrete, plasters, plastering, microcement, epoxy microcement, concrete repair mortars, etc. Likewise, they are pigments perfectly compatible with our Sealcem® varnishes.

Pigments for concrete that are stable outdoors and that form the base of the wide spectrum of colors that make up the Arcocem® Plus range. Pigment pastes that offer a wide range of application possibilities: crafts, handicrafts, enamels, paints, etc.

Download the technical sheet of Arcocem® WT Basic here

Features of water-based concrete pigments Arcocem® WT Basic

Density (g/cm³)

2 ± 1

Viscosity (L3, 20 rpm)

5000 ± 3000 mPa•s

Compatible with aqueous systems

Resistant to alkalis and sunlight

Performance

The performance of Arcocem® WT Basic varies depending on the color of the dose to be made.

Presentation

The Arcocem® WT Basic water dispersion pigments are presented in 0.5 and 1 liter containers.

Uses and fields of application for water-based concrete pigments Arcocem® WT Basic

The water-based pigments Arcocem® WT Basic allow for the most varied applications:

Paints, varnishes, enamels, water-based lasur.

Crafts, handicraft.

Coatings, plasters, smoothings, microcement, imprinted concrete.

Especially for our systems STTANDARD, UNLIMITTED, EVOLUTTION, EFECTTO, COVERCEM®, SEALCEM® and INDUSTTRIAL.

Product ready to use. Shake before use. No dilution required.

Precautions for water-based concrete pigments Arcocem® WT Basic

The Arcocem® WT Basic pigments are suitable for outdoors. The effects of sunlight do not affect their color. Only the Intense Red color can be altered, slightly decreasing its intensity.

Other considerations to keep in mind with these water-based pigments are:

They are not pigment pastes suitable for solvent or 100% solid systems.

We recommend closing the lid after each use so that the product does not dry out or thicken.

In case of contact with skin, wash immediately with soap and water.

It is important to have rubber gloves and protective glasses to handle these pigments.

Colors of water-based concrete pigments Arcocem® WT Basic

Blanco, Negro, Negro de Humo, Azul, Magenta, Verde, Rojo, Rojo Naranja, Rojo Intenso, Naranja, Amarillo, Amarillo Limón and Amarillo Vainilla are the 13 pigments for concrete available from Arcocem® WT Basic.

A color chart is shown below. It is important to note that these are digital simulations, so there may be a slight variation compared to the actual samples.

Blanco Negro Negro de Humo Azul

Magenta Verde Rojo Rojo-Naranja

Rojo Intenso Naranja Amarillo Amarillo Limón

Amarillo Vainilla

Arcocem Fast® powder pigments for concrete

Arcocem® Fast are the pigments for concrete from Topciment in powder version. Fabulous performance inorganic pigments that incorporate special additives. Specially designed for mass coloring of concretes and mortars, either in plant or on site.

Its formulation promotes the dispersion of the pigment and, consequently, homogeneous and totally stable colorations. Its high resistance to sunlight as well as to alkalinity, make them the best ally for outdoor spaces.

Easy-to-incorporate powder pigments. A dosing system that avoids homogeneity errors in the final coloration. In addition, they do not harm at all the final resistances of the coating nor alter the conditions of consistency and hardening.

Terrazzo, prefabricated or plastering mortars are other materials that can be colored thanks to Arcocem ®Fast pigments. Products that limit the possible appearance of efflorescence in the future.

Download the technical sheet of Arcocem® Fast here

Pigments for water-based concrete Arcocem® WT Plus

Arcocem® WT Plus are our single-dose pigments for water-based concrete. Easily miscible pigment pastes that allow us to obtain the different color charts of Topciment®.

They are used to color the Covercem® Stone and Covercem® Texture concrete repair mortars, as well as the Covercem® Monocrom and Covercem® Restaura mineral consolidating coatings.

Ready-to-use products that do not require dilution. Suitable for water-based systems and to also give color to our microcement systems. They guarantee a high color stability. Over time, they remain undamaged by light or aging.

Therefore, they are ideal pigments for outdoor concrete. They are very resistant to the effects of sunlight and alkalis. Free from plasticizers, emulsifiers, solvents and ammonia.

Download the technical sheet of Arcocem® WT Plus here

Solvent-based pigments for concrete Arcocem® DSV Plus

Arcocem® DSV Plus are our solvent-based concrete pigments. In the same way as with water-based ones, they present an extraordinary color stability both indoors and outdoors.

Single doses of easily miscible pigments. They are mainly used with our solvent-based imprinted concrete varnishes Sealcem® DSV. Thanks to them we obtain the 24 colors of the Stonecem® Floor imprinted mortar chart.

Pigments for concrete that can also be applied to other solvent systems, as well as on cementitious and mineral surfaces such as microcement. They stand out for their excellent resistance to UV rays, thus being perfectly suitable for applications in outdoor spaces. Free of plasticizers and emulsifiers.