Elasticity
We guarantee NO CRACKING. The elastic characteristics of Topciment microcements withstand slight deformations if their application is correct. If cracks were to appear, the warranty does not cover defects caused by the cracking of the support.
Physical resistance
Microcement is comparable to natural wood parquet. However, in terms of RESISTANCE TO SCRATCHES, BLOWS AND WEAR, tests carried out following EN standards show
that its performance far exceeds most natural wood parquets. The warranty does not cover damage caused by the customer's misuse, such as blows, scratches, cuts or similar damage.
We recommend downloading and printing these maintenance and cleaning of microcement instructions
Chemical resistance
The microcement coating has good RESISTANCE TO CHEMICAL PRODUCTS for cleaning; but we recommend the use of Ecoclean or Ecoclean PRO for its cleaning and Ceraciment or Ceraciment PRO for its maintenance. Being a continuous coating, without joints, cleaning is much easier.
Antideslizante
Thanks to the variety of microcements and their different textures, it is possible to adapt the type of finish according to the use and location required. Smoother for interiors and
rougher for wet and outdoor areas.
We certify a high anti-slip aptitude, synonymous with safety.
Fire reaction
The fire reaction of construction materials is the behavior of a material in the face of
fire based on its contribution to its development. This behavior is classified according to the CTE SI regulations.
What is the CTE SI regulation? It is a set of standards and protocols that are required of construction elements in their different situations and uses. Along with the
CE marking, we certify the safety of our material in case of fire.
The system for walls Microfino, with all its layers, including sealing, obtains the classification B-S1,d0.
The system for floors Microdeck, with all its layers, including the seal, obtains the classification Bfl-S1.
The classification used by the Technical Code is defined by the following parameters:
Contribution to fire spread.
A1: Non-combustible; without contributing to fire at maximum degree.
A2: Non-combustible; without contributing to fire at a lesser degree.
B: Combustible with very limited contribution to fire.
C: Combustible with limited contribution to fire.
D: Combustible with medium contribution to fire.
E: Combustible with high contribution to fire.
F: Unrated.
Opacity of the produced smoke.
s1: Low opacity.
s2: Medium opacity.
s3 : High opacity.
Fall of inflamed drops or particles.
d0: Does not produce them.
d1: Produces them to a medium degree.
d2: Produces them to a high degree.
According to its application.
Without subscript for roofing and wall materials.
With FL subscript for floor materials.
Adherence
Topciment guarantees a GREAT ADHERENCE of its microcements on any type of surface, even tiles or glasses, thanks to its formulation.
Color stability
The dyes used to give color to the microcement are of mineral origin, which are the ones that best behave
against the alkalinity of the cement, the weather and the sunlight. That's why, they remain stable without suffering evident alterations.
The varnishes used for sealing are aliphatic. Their chemical composition makes them a hard finish
and very resistant to ultraviolet rays, so they do not yellow in the face of sunlight.
Impermeabilidad
Thanks to the sealers we apply to the finish of our microcements, we manage to enhance their hardness and resistance. We obtain waterproof surfaces resistant to moisture, very suitable for bathrooms and showers.
Certificates and tests
We are at your disposal. You can request the certificates and tests you want about our products, by filling out the following form:
