Monocomponent microcement Evoluttion

Evoluttion microcement is the monocomponent microcement from Topciment. It provides good mechanical resistances and simplifies mixes to avoid mistakes.

Buy Technical data sheets

Evoluttion Microbase20 kg · L · 20 kg · XL · 20 kg · XXL Buy

3Range
48Colours
7Packaging
4Technical data sheets

What it is

Evoluttion is the improved line of monocomponent microcement (cement and water) from Topciment. With this product, the mixes and preparation are simplified, thus minimizing the possible errors by the professional.

A monocomponent microcement that can boast of maintaining the good workability of the range of traditional bicomponent microcement Sttandard, with the particularity that it offers superior mechanical resistances.

Furthermore, with Evoluttion, transport and storage costs are reduced. All benefits for the microcement applicator.

Advantages

Mixed with water only
Being one-component, preparation is simpler and the margin for error is kept to a minimum.
Higher strengths
It keeps the workability of the Sttandard range, but with higher mechanical strengths.
Lower logistics costs
It reduces transport and storage costs compared with the two-component system.
Versatile finishes
Suitable for walls and floors, indoors and outdoors, with a wide variety of decorative solutions.

Monocomponent microcement preparation Evoluttion Microbase

Evoluttion Microbase is the single-component microcement for preparation, also known as rustic microcement if it is decided to use it as a finishing microcement.

Flexural strength≥ 11.90 N/nm2 (28 days)
Apparent densityIn powder - 1.175 ± 50Kg/m3 · In paste - 1.545 ± 50Kg/m3 · Hardened - 1.470 ± 50Kg/m3
Compression resistance≥ 42 N/nm2 (28 days)
Adherence to the support≥ 1.99 N/nm2 (28 days)

See full details

In any case, the decorative solutions that this coating offers to the professional are most varied and distinguished. Regarding its application, it should be noted that it is always used before the application of Evoluttion Microfino and Evoluttion Microdeck.

Evoluttion Microbase is available in 3 granulometries: L, XL and XXL.

Yield

Evoluttion Microbase L (2 hands) - 2,00 Kg/m2
Evoluttion Microbase XL (2 hands) - 2,80 Kg/m2
Evoluttion Microbase XXL (2 hands) - 3,40 Kg/m2

Packaging

The monocomponent microcement preparation Evoluttion Microbase is presented in 20 kg black plastic conical buckets.

Download the technical sheet here Evoluttion Microbase

Packaging

20 kg · L Buy
20 kg · XL Buy
20 kg · XXL Buy

Monocomponent microcement finish for walls

Evoluttion Microfino is the single-component microcement optimal for finishing walls, facades or furniture, as it is designed solely to coat vertical and non-walkable surfaces.

Flexural strength≥ 8 N/nm2 (28 days)
Apparent densityIn powder - 1.005 ± 50Kg/m3 · In paste - 1.505 ± 50Kg/m3 · Hardened - 1.285 ± 50Kg/m3
Compression resistance≥ 29 N/nm2 (28 days)
Adherence to the support≥ 1.7 N/nm2 (28 days)

See full details

Ensures a silky and soft to the touch finish and facilitates the achievement of watermarks with ease. Qualities that make Evoluttion Microfino a high-value coating in the decoration of interiors and exteriors.

Aesthetically, it is a coating that resembles lime stucco, with the difference that its finish is much more natural than lime stucco.

Evoluttion Microfino is available in 2 granulometries: S and M.

Yield

Evoluttion Microfino S (2 hands) : 0,60 kg/m²
Evoluttion Microfino M (2 hands) 0,60 kg/m²

Packaging

The monocomponent finishing microcement Evoluttion Microfino, especially recommended for walls, comes in 15 kg black plastic conical buckets.

Download the technical sheet here Evoluttion Microfino

Packaging

15 kg · S Buy
15 kg · M Buy

Monocomponent microcement finish for floors

Evoluttion Microdeck forms the best single-component microcement finish for indoor floors and pavements. The aspect that this microcement gives to the rooms is most natural and elegant.

Flexural strength≥ 10 N/nm2 (28 days)
Apparent densityIn powder - 1.175 ± 50Kg/m3 · In paste - 1.480 ± 50Kg/m3 · Hardened - 1.430 ± 50Kg/m3
Compression resistance≥ 40 N/nm2 (28 days)
Adherence to the support≥ 1.2 N/nm2 (28 days)

See full details

But Evoluttion Microdeck can also be applied on stairs, shower trays, sinks, countertops, and walls. Due to its medium grain texture, the water effect is less than that of Evoluttion Microfino. Aesthetically, this single-component finishing microcement is very similar to polished concrete.

Evoluttion Microdeck it is available in 2 granulometries: M y L.

Yield

Evoluttion Microdeck M (2 hands) - 1,00 Kg/m2
Evoluttion Microdeck L (2 hands) - 1,00 Kg/m2

Packaging

The monocomponent finishing microcement Evoluttion Microdeck, whose resistances reach another level in interior floors, is presented in 18 kg black plastic conical buckets.

Download the technical sheet here Evoluttion Microdeck

Packaging

18 kg · M Buy
18 kg · L Buy

Technical comparison of the range

	Evoluttion Microbase	Evoluttion Microfino	Evoluttion Microdeck
Flexural strength	≥ 11.90 N/nm2 (28 days)	≥ 8 N/nm2 (28 days)	≥ 10 N/nm2 (28 days)
Apparent density	In powder - 1.175 ± 50Kg/m3 · In paste - 1.545 ± 50Kg/m3 · Hardened - 1.470 ± 50Kg/m3	In powder - 1.005 ± 50Kg/m3 · In paste - 1.505 ± 50Kg/m3 · Hardened - 1.285 ± 50Kg/m3	In powder - 1.175 ± 50Kg/m3 · In paste - 1.480 ± 50Kg/m3 · Hardened - 1.430 ± 50Kg/m3
Compression resistance	≥ 42 N/nm2 (28 days)	≥ 29 N/nm2 (28 days)	≥ 40 N/nm2 (28 days)
Adherence to the support	≥ 1.99 N/nm2 (28 days)	≥ 1.7 N/nm2 (28 days)	≥ 1.2 N/nm2 (28 days)
Yield	Evoluttion Microbase L (2 hands) - 2,00 Kg/m2 Evoluttion Microbase XL (2 hands) - 2,80 Kg/m2 Evoluttion Microbase XXL (2 hands) - 3,40 Kg/m2	Evoluttion Microfino S (2 hands) : 0,60 kg/m² Evoluttion Microfino M (2 hands) 0,60 kg/m²	Evoluttion Microdeck M (2 hands) - 1,00 Kg/m2 Evoluttion Microdeck L (2 hands) - 1,00 Kg/m2
Packaging	The monocomponent microcement preparation Evoluttion Microbase is presented in 20 kg black plastic conical buckets.	The monocomponent finishing microcement Evoluttion Microfino, especially recommended for walls, comes in 15 kg black plastic conical buckets.	The monocomponent finishing microcement Evoluttion Microdeck, whose resistances reach another level in interior floors, is presented in 18 kg black plastic conical buckets.

How to apply

1
Step 1
Place the mesh over the surface to be covered. Apply Primacem Plus / ABS .
2
Step 2
Apply a first layer Microbase without pigment. Sanding
3
Step 3
Apply a second coat of Microbase with pigment. Sanding
4
Step 4
Apply a first layer of Microfino / Microdeck with pigment. Sanding
5
Step 5
Apply a second coat of Microfino / Microdeck with pigment. Sanding
6
Step 6
Apply two coats by roller Presealer .
7
Step 7
Apply two coats by roller Topsealer