Evoluttion is the improved line of one-component microcements (cement + water).
With Evoluttion microcement, mixing and preparation are simplified, thus reducing possible errors. Moreover, it also allows to reduce transport costs.
Microcemento Evoluttion maintains the good workability of the Sttandard line, with the particularity that it offers an improvement of the mechanical resistances.
Evoluttion Microbase is the one-component microcement for preparation, also known as rustic microcement if you decide to use it as a finishing microcement.
In any case, the decorative solutions offered by this coating to the professional are very varied and distinguished. As for its application, it should be noted that it is always used before the application of Evoluttion Microfino and Evoluttion Microdeck.
Evoluttion Microbase is available in 3 granulometries: L, XL and XXL.
Download here the data sheet of Evoluttion Microbase
Technical characteristics
≥ 11.90 N/nm2 (28 days)
In powder form - 1.175 ± 50Kg/m3
In paste - 1.545 ± 50Kg/m3
Hardened - 1.470 ± 50Kg/m3
≥ 42 N/nm2 (28 days)
≥ 1,99 N/nm2 (28 days)
Consumption
Packaging
Evoluttion Microbase single-component microcement is packaged in 20 kg black plastic conical buckets.
Evoluttion Microfino is the optimal finishing one-component microcement for walls, facades or furniture, as it is only intended for coating vertical and non-trafficable surfaces.
It guarantees a silky and smooth finish to the touch and makes it easy to achieve watermarks. These qualities make Evoluttion Microfino a coating of high value in interior and exterior decoration.
Aesthetically it is a coating that resembles lime stucco with the difference that its finish is much more natural than lime stucco.
Evoluttion Microfino is available in 2 granulometries: S and M.
Download here the data sheet of Evoluttion Microfino
Technical characteristics
≥ 8 N/nm2 (28 days)
In powder form - 1.005 ± 50Kg/m3 In paste - 1.505 ± 50Kg/m3 Hardened - 1.285 ± 50Kg/m3
≥ 29 N/nm2 (28 days)
≥ 1,7 N/nm2 (28 days)
Consumption
Packaging
The single-component finishing microcement Evoluttion Microfino, especially recommended for walls, is packaged in 15 kg black plastic conical buckets.
Evoluttion Microdeck is the best one-component microcement for finishing interior floors and floors. The appearance that this microcement gives to the rooms is very natural and elegant.
But Evoluttion Microdeck can also be applied on stairs, shower trays, washbasins, worktops and walls. Due to its medium-grained texture, the water effect is lower than that of Evoluttion Microfino. Aesthetically, this single-component microcement finish is very similar to polished concrete.
Evoluttion Microdeck is available in 2 granulometries: M and L.
Download here the data sheet of Evoluttion Microdeck
Technical characteristics
≥ 10 N/nm2 (28 days)
In powder form - 1.175 ± 50Kg/m3 In paste - 1.480 ± 50Kg/m3 Hardened - 1.430 ± 50Kg/m3
≥ 40 N/nm2 (28 days)
≥ 1,2 N/nm2 (28 days)
Consumption
Packaging
Evoluttion Microdeck single-component finishing microcement, whose resistance reaches a new level in interior floors, is packaged in 18 kg black plastic conical buckets.
