Water-based and solvent-based varnishes for imprinted concrete Sealcem

This anti-slip varnish for imprinted concrete has the peculiarity of improving the curing while significantly enhancing the colour of the coatings that are sealed with it. Likewise, its good adhesion on porous and mineral substrates as well as cementitious ones stands out.

Its high resistance to UV rays, alkalinity, efflorescence, water and cold-heat cycles make this solvent-based methacrylate sealer a fantastic alternative for protecting decorative and industrial floors in exteriors.

An anti-slip varnish for imprinted concrete that is characterised by offering a very natural appearance and a rough finish. Therefore, it is highly recommended to use on pedestrian lanes, roadways and garage floors.

Yield

As an imprinted concrete varnish, Sealcem® DSV M70 AD offers a performance of 6-8 m2 /L.

Packaging

The anti-slip Sealcem® DSV M70 AD imprinted concrete varnish is available in 18 litre containers.

A product that stands out for its rough finish and natural appearance. Solvent-based, this varnish for imprinted concrete is perfect for outdoor use due to its good resistance to alkalinity, efflorescence, to cold-heat cycles, to water and humidity. Ideal for protecting pedestrian lanes, driveways and garage floors, among others, for its excellent resistance to abrasion.

An anti-slip, solvent-based varnish for imprinted concrete that enjoys very good adhesion on porous supports and mineral or cementitious bases, which can also be used on concrete and microcement coatings.

Yield

As a sealer for imprinted concrete, the anti-slip and solvent-based varnish Sealcem® DSV S100 AD has a yield of 6-8 m2 /L.

Packaging

The anti-slip and solvent-based Sealcem® DSV S100 AD varnish for imprinted concrete comes in 18-litre containers.

This water-based varnish for imprinted concrete provides greater penetrability in the case of absorbent supports. A very natural finish that confers unbeatable resistances to abrasion, to alkalinity, to water and to weather, among others.

A product resistant to efflorescence and weathering (does not yellow). For all these reasons, it is a highly recommended varnish for imprinted concrete to apply on driveways, pedestrian lanes and cementitious pavements.

Yield

The performance of the Sealcem® WT AC70 water-based varnish for imprinted concrete is 8-10 m2/L.

Packaging

The water-based varnish for imprinted concrete Sealcem® WT AC70 comes in 25 litre containers.

It is a solvent-based methacrylate sealer for stamped concrete with good chemical and mechanical resistance in general. Particularly resistant to abrasion, hot-cold cycles, water and humidity as well as alkalinity and efflorescence.

It can also be used as a decorative and protective varnish on concrete and stamped concrete floors. It creates a protective film that improves curing and is ideal for outdoor use, as it does not yellow.

Thanks to its good weather resistance it is a perfect varnish for driveways, footpaths, garage floors, decorative stamped concrete or concrete floors.

A stamped concrete sealer with a very natural finish that enhances the colour of the coatings on which it is applied.

Yield

Sealcem® DSV M70 Methacrylate solvent-based methacrylate sealer for stamped concrete has a coverage of 6-8 m2 /L.

Packaging

Sealcem® DSV M70 solvent-based methacrylate stamped concrete sealer is available in 18 litre containers.

This methacrylate varnish for stamped concrete also promotes the colour of stamped concrete and polished concrete surfaces, keeping the original texture intact. Sealcem® DSV M100 creates a protective film that improves the curing of the stamped concrete floor.

A solvent-based stamped concrete sealer that does not require dilution and is highly recommended for use on carriageways, pedestrian lanes or decorative stamped concrete pavements, among others.

Its good weather resistance makes Sealcem® DSV M100 a perfect outdoor concrete coating. Like its predecessor, it is non-yellowing and has very good resistance to abrasion, hot-cold cycles and water and humidity.

Yield

The spreading rate of Sealcem® DSV M100 solvent-based methacrylate stamped concrete varnish is 6-8 m2 /L.

Packaging

Sealcem® DSV M100 solvent-based methacrylate stamped concrete sealer is packaged in 18 litre containers.

Imprinted concrete varnish capable of boosting the colour of imprinted and polished concrete floors. A product that also has good mechanical and chemical resistances: to water and moisture, to abrasion and to alkalinity and efflorescence.

This solvent-based varnish for imprinted concrete produces a protective film that significantly improves the curing process of decorative pavements and industrial pavements of imprinted concrete, polished concrete and microcement.

Just like the previous two varnishes, Sealcem® DSV S70 is especially indicated for outdoors due to its resistance to weather and cold-heat cycles. A product that enjoys high transparency.

Yield

The performance of the Sealcem® DSV S70 solvent-based varnish for imprinted concrete is 6-8 m2 /L.

Packaging

The solvent-based imprinted concrete resin Sealcem® DSV S70 comes in 18-litre containers.

Among its multiple features, this varnish for imprinted concrete ensures good chemical and mechanical resistances to cold-heat cycles, to humidity and water, to abrasion as well as to alkalinity, among many others.

A varnish for decorative and industrial imprinted concrete floors that enhances the colour of the coatings, without altering the original texture of them.

Yield

Applied on imprinted concrete, the solvent-based varnish Sealcem® DSV S100 has a yield of 6-8 m2 /L.

Packaging

The solvent-based Sealcem® DSV S100 imprinted concrete varnish comes in 18 litre containers.

With a satin finish and available in 24 colours, it is a coloured stamped concrete sealer that is characterised by its high covering power. A product that creates a protective film that substantially improves the performance of the floor to be decorated.

A coloured varnish for solvent-based stamped concrete that shows great adhesion on porous substrates and mineral or cementitious bases. It is particularly suitable for outdoor areas thanks to its resistance to weathering, water and cold-heat cycles.

Yield

When applied on stamped concrete, Sealcem® DSV Colour solvent-based colour coating has a coverage of 10-8 m²/L.

Packaging

Sealcem® DSV Colour solvent-based coloured stamped concrete sealer is packaged in 20 kg containers.

This ready-to-use product enjoys very good water and moisture resistance, in addition to highlighting the colour of the supports that are sealed with this curing lacquer. It forms the perfect complement to protect the concrete coatings that are executed with the industrial mortars of the Stonecem® family.

Likewise, it has good adhesion on porous substrates and mineral or cementitious bases.

Yield

The performance of the Sealcem® DSV S30 solvent curing lacquer for concrete is 6-8 m²/L.

Packaging

The solvent curing lacquer Sealcem® DSV S30 comes in 25 litre jerry cans.

A sealer specifically formulated to create a tough protective layer on driveways, walkways, garages, decorative pavements, concrete floors and other surfaces that require superior adhesion and long-lasting protection. Suitable for both indoor and outdoor use, it offers a transparent finish that doesn’t yellow over time.

Sealcem® DSV M100 AD stands out for its easy application and quick drying time, allowing for efficient commissioning. Its excellent adhesion and resistance to abrasion, moisture and weathering make it the best choice to ensure the durability and upkeep of stamped and polished concrete floors.

Yield

The spreading rate of Sealcem® DSV M100 AD anti-slip methacrylate sealer for stamped concrete is 6–8 m²/L.

Packaging

Sealcem® DSV M100 AD anti-slip methacrylate sealer for stamped concrete is packaged in 18-litre containers.

This varnish for imprinted concrete and polished concrete maintains the same good mechanical and chemical resistances. It withstands abrasion, water and weather perfectly.

It also stands out for excellent dry and wet adhesion and for enhancing the colour of imprinted and polished concrete pavements.

A water-based varnish for imprinted concrete that enhances curing and presents good adhesion on porous substrates and mineral or cementitious bases. Its use is intended for outdoors.

Yield

The performance of the Sealcem® WT Metacret water-based varnish for imprinted concrete is 8-10 m2 /L.

Packaging

The water-based varnish for imprinted concrete Sealcem® WT Metacret is available in 25 litre containers.

The lithium salts in its formula deliver outstanding durability to industrial floors while significantly enhancing water resistance. This product is specifically designed for demanding commercial and industrial areas that face high levels of wear and tear daily.

This lithium concrete hardener also stands out for its fast curing time, easy application, and low VOC content. An eco-friendly and reliable solution for areas requiring maximum protection and minimal downtime.

Yield

The Sealcem® WT LI lithium concrete hardener offers consumption between 10 and 15 m²/L, depending on the surface porosity.

Packaging

The Sealcem® WT LI concrete and industrial floor hardener is available in 5- and 25-liter containers.