Water-based acrylic microcement resins - Acricem

Product that is supplied ready to use and can also be applied as a primer in a single coat using a roller or brush. In this case, you will have to wait a minimum of 30 minutes and never more than 24 hours to apply the first coat of microcement on the support.

Among the multiple qualities of this resin for microcement, it is worth highlighting the reduction of shrinkage cracks. It also provides greater cohesion and plasticity of the mortar or concrete when they are fresh.

Uses

• As a primer to secure cementitious supports before applying microcement.
• Additive for the kneading water of mortars.
• Component B of two-component microcement systems, except in swimming pools.

Yield

The performance of the Acricem microcement resin is 0.10L/m2, although it may vary depending on the porosity of the treated support.

Packaging

The water-based acrylic resin Acricem is available in 5 and 25 liter containers.

Instructions for use

Important: previously mix the Acricem microcement resin in the kneading water, homogenizing the mixture very well before making the mortar. 1. Pour a little of the Acricem microcement resin into a container and add the corresponding amount of pigment. 2. Mix the resin and the pigment until achieving a homogeneous color. 3. Gradually add the two-component microcement in powder form. 4. Mix with low-speed mechanical stirrer for 4 minutes until there are no lumps.

Mixing ratios

Acricem + Sttandard

• 10 kg of Sttandard Microbase L - 2.5 - 3.0 L Acricem
• 10 kg of Sttandard Microbase XL - 3.0 L Acricem
• 10 kg of Sttandard Microbase XXL - 2.5 L Acricem
• 10 kg of Sttandard Microdeck M - 3.0 - 3.5 L Acricem
• 10 kg of Sttandard Microfine XS - 4.8 - 5.0 L Acricem
• 10 kg of Sttandard Microfine S - 4.5 L Acricem
• 10 kg of Sttandard Microfine M - 4.3 L Acricem
• 10 kg of Sttandard Microstone L - 2.8 - 3.0 L Acricem
• 10 kg of Sttandard Microstone XL - 2.7 - 3.0 L Acricem

Acricem + Natture

• 10 kg of Natture S - 3.2 L Acricem
• 10 kg of Natture M - 3.7 L Acricem
• 10 kg of Natture L - 3.3 L Acricem
• 10 kg of Natture XL - 3.0 L Acricem

A microcement resin that includes water repellents in its formula, repelling water and therefore being the perfect complement for pool glasses. With low water absorption, it creates safe spaces from cracks thanks to its superior mechanical resistances.

Uses

• Liquid component for kneading the two-component microcement for Atlanttic Aquaciment pools. It cannot be used as component B of another Topciment® microcement system.

Yield

The performance of the Acricem Pool microcement pool resin is 0.10L/m2, but it can change depending on the porosity.

Packaging

The water-based acrylic resin Acricem Pool is available in 25-liter containers.

Instructions for use

1. Pour a little Acricem Pool microcement resin into a container and pigment with the corresponding amount of Arcocem® pigment. 2. Mix until you get a liquid whose color is completely homogeneous. 3. Gradually add the Atlanttic Aquaciment microcement for pools. Mix with mechanical stirrer at low revolutions for at least 2-3 minutes. 4. Stop when the mixture is homogeneous and free of lumps. 5. Apply 1 layer of Acricem Pool with a roller and let it dry for approximately 30-45 minutes.

Mixing ratios

Important: Proportions must be respected to ensure the properties of the microcement coating.

• 10 kg of Atlanttic Aquaciment XL - 3.2 -3.5 L Acricem Pool
• 10 kg of Atlanttic Aquaciment XXL - 3 - 3.1 L Acricem Pool