Concrete cleaners: descalers and strippers Ecoclean

Similarly, it is an acidic concrete cleaner that has been formulated with biodegradable ingredients and is environmentally friendly. A product that is fundamental for cleaning tasks in construction, restoration and heritage works, as well as imprinted concrete.

An exceptional detergent for the removal of salts, efflorescence, lime marks, grouts, cement and damage caused by mould, saltpetre and humidity. Quickly removes lime and cement marks, without having to use more aggressive acids such as hydrochloric acid.

In addition, it is a concrete cleaner that suppresses lime from the pores, thus allowing breathability and permeability. This ultimately allows, to prevent the appearance of efflorescence and the proper penetration of primers and consolidants.

An acid and low-foam concrete cleaner, ideal for preparing and cleaning mineral surfaces before applying the corresponding primers and coatings. Especially recommended for mineral and cementitious surfaces such as restoration, repair and renovation mortars, concrete, limestone, stoneware, brick and terrazzo, among others.

Applicable on walls, floors, ceilings and facades. It can be applied both diluted in water and concentrated. Although the more concentrated it is, the faster and more powerful action it will present.

An alkaline concrete cleaner for exclusive professional use and ideal for use in construction and food and health industry, as it eradicates the most ingrained dirt.

A most suitable detergent for pavements, terrazzo, imprinted concrete floors, deposits, white areas, garages, airports, workshops, hospitals, machinery and equipment resistant to alkaline products such as stainless steel, etc.

An eco-friendly and biodegradable concrete cleaner that removes all types of marks and stains. Such as soot, grease, food residues, oil, blood, tyre marks, release agents or lime marks, among others.

Of alkaline character, this cleaner for imprinted floors and vertical concrete is capable of removing virtually all types of marks and stains: soot, food residues, lime marks, oil, tyre marks or pollution, among others.

Yield

The performance of the Ecoclean Pro concrete cleaner depends on the degree of dirt, the type of support and absorption.

Packaging

The alkaline concrete cleaner Ecoclean Pro comes in 1, 5 and 25 litre containers.

A guaranteed speed even on large surfaces such as floors, facades and walls. Its long activity time, from hours to days, is one of its most notable qualities. A concrete cleaner that is totally suitable for surfaces resistant to solvents such as wood, brick, metals or monolayers, apart from concrete.

This imprinted concrete stripper is not corrosive, offers a mild smell and is biodegradable. Ecoclean Stripper Eco can be used to suppress layers of water-based resin in those imprinted concrete coatings that are very deteriorated.

A concrete cleaner that is not at all recommended for two-component or one-component reactive products (self-crosslinking).

In the same way as Ecoclean Stripper Eco, this stripper for imprinted concrete has the ability to remove several layers of paint in a single movement. A product that is not corrosive and is free of dichloromethane.

A biodegradable concrete cleaner, easy to clean and remove with water. It also serves to eliminate polyurethane foams or adhesives and is equally effective on wood, concrete, brick, monolayers and metals.

Thanks to its solvent-based formulation, this stripper for imprinted concrete stands out for its high efficiency and penetration power.

For general use, it can be applied both on walls and facades as well as floors, lacquered and enamelled surfaces. It is ideal for removing resin layers in the coatings of imprinted concrete that are deteriorated over time.

A highly recommended acid descaler detergent for cleaning those surfaces that have been damaged by the effects of rust. Following its application, it is necessary to protect the support with an anticorrosive coating.

A ready-to-use product that does not contain hydrochloric acid, biocides or surfactants. Perfect for finishing off rust residues on ferrous surfaces. An acid descaler that can be used as a limescale remover, cement marks and grouts.

This concrete cleaner, among other materials, reacts with iron oxide forming an iron phosphate derivative that temporarily inactivates the metal against corrosion. To prevent the oxidation from reactivating, the surface must be immediately protected with an anti-corrosive primer.

Being a gel format product, it is very easy to apply on vertical surfaces. An acid descaler that acts in depth on the surfaces on which it is administered. In addition to being used as a concrete cleaner, Ecoclean Anti Rust is a perfect detergent to use in industry, construction and general maintenance tasks.

Yield

The performance of the Ecoclean Anti Rust acid descaler detergent will depend on the application method, the type of surface on which it is applied and the degree of oxidation. Approximately, from 3 - 5 m²/L.

Packaging

The acid descaling detergent Ecoclean Anti Rust is available in 1 and 5 litre containers.