Cold, quick-curing, waterproof two-component polyurea
Topsealer Pro + is a cold, two-component, quick-curing polyurea that is waterproof against running water and is
ideal for the protection of surfaces coated with microcement and concrete indoors. This two-component varnish
100% solids does not require a primer, in fact it is designed to be applied in a single layer as it has the ability
to fully penetrate the pores ensuring a total seal.
This exclusive high-gloss varnish adds an extra hardness to the microcement as well as preventing the breathability to
water vapour. Likewise, this two-component varnish 100% solids has the ability to enhance the colour of the microcement and
imprinted concrete floors indoors.
If the professional sought to reduce the shine of the final finish, they could then apply a coat of our
Topsealer WT One Coat varnish (satin, matte or super matte finish) or a coat of our Topsealer DSV
varnish (satin or matte finish). With any of these combinations, the surface coated with microcement automatically acquires
greater scratch resistance.
We have two types of cold bicomponent polyurea Topsealer Pro + depending on the curing times: Fast and Slow.
Quick-curing and waterproof cold polyurea Topsealer Pro + Fast
The two-component cold polyurea Topsealer Pro + Fast intensifies and enhances the colour of microcement and concrete supports.
Its application is done with a "pore 0" roller or trowel and guarantees excellent resistance to water, wear, certain
chemical products and UV light.
This two-component varnish 100% solids that does not require primer enhances the colour of microcement coatings.
In addition to presenting great resistance, it stands out for its notable resistance to yellowing.
Download here the technical sheet of Topsealer Pro + Fast
Quick-curing and waterproof cold polyurea Topsealer Pro + Slow
The two-component 100% solids varnish Topsealer Pro + Slow does not require primer. A two-component cold polyurea with the ability
to waterproof against running water and protect any microcement support indoors as well as concrete floors.
Being a very glossy varnish, this cold polyurea enhances the shine of the surface as well as its hardness. It is applied in a single coat
either with a "pore 0" roller or trowel. It has very good resistance to wear, UV light (does not yellow) and some chemicals.
In the same way as it happens with the cold polyurea Topsealer Pro + Fast, this varnish
100% solid bicomponent waterproofs the microcement against running water, thus preventing water vapour breathability.
Download here the technical sheet of Topsealer Pro + Slow
Technical features of cold polyureas Topsealer Pro +
Quick drying
2-3 horas Topsealer Pro + Fast
8 horas Topsealer Pro + Slow
Waterproofs
In front of the running water
Application time
15 minutos Topsealer Pro + Fast
25-30 minutos Topsealer Pro + Slow
Performance
The performance of the cold polyureas Topsealer Pro + Fast and Topsealer Pro + Slow is: 60-100 g/m2 (1 coat)
Presentation
The 100% solid and waterproof two-component varnishes Topsealer Pro + Fast and Slow are presented in a two-component pack
0.8 kg (component A) and 0.64 kg (component B)